This site uses cookies for better user experience and analytics.
G-750 Full Face Respirator Mask with A1P2 Filters
€89,99
4.0
1 review1
total reviews
CE CERTIFIED:The AirGearPro G-750 Full Face Respirator Mask is rigorously tested and certified to meet the highest standards of quality and safety. This ensures reliable protection against a variety of hazards, including painting, sanding, pesticide spraying, woodworking, building work, renovation, demolition, construction, DIY, industrial, chemical, military use and more.
DUAL FILTRATION SYSTEM (A1P2):Our full face work mask features a dual filtration system of class A1P2 to guarantee your protection against gases, vapours and particles. The anti-gas cartridges filter out organic gases and vapours with boiling points above 65°C. The P2 dust filter filters at least 98% of airborne particles.
DURABILITY:The body of the G-750 full face dust mask is made of highly durable materials. The Facepiece of this respirator mask is made of air-tight silicone seal to completely protect you from dust and gases. The frame of these masks & respirators are made of strong ABS material and the Polycarbonate visor provides strength along with impact and chemical resistance, increasing the longevity of the masks.
LIGHTWEIGHT & COMFORTABLE:The 5-point straps on this lightweight respirator mask with filters make it easy to put on and take off, comfortable on the skin, and appropriate for all face shapes and sizes. The G-750 is an odourless painting mask for individuals who require the best respirator mask for spray paint on the market.
VIEW & COMMUNICATION:This full face DIY mask features a wide field of vision thanks to the low filter profile and a scratch-resistant anti-fog glass offering a best in class 76° viewing angle while working. The voice diaphragm installed in this respiratory mask allows uninterrupted and easy communication during use.
CARE INSTRUCTIONS:After use, rinse the facepiece thoroughly with fresh warm water and allow it to air dry in an uncontaminated area. Avoid using solvents or strong detergents, as they may damage the face visor.
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Free shipping and returns
A1P2 - DUAL FILTRATION SYSTEM
Our gasmask features a dual filtration system of class A1P2 to guarantee your protection against gases, vapours and particles. The anti-gas cartridges filter out organic gases and vapours with boiling points above 65°C. The P2 dust filter filters at least 98% of airborne particles.
A1P2 - DUAL FILTRATION SYSTEM
Our gasmask features a dual filtration system of class A1P2 to guarantee your protection against gases, vapours and particles. The anti-gas cartridges filter out organic gases and vapours with boiling points above 65°C. The P2 dust filter filters at least 98% of airborne particles.
A1P2 - DUAL FILTRATION SYSTEM
Our gasmask features a dual filtration system of class A1P2 to guarantee your protection against gases, vapours and particles. The anti-gas cartridges filter out organic gases and vapours with boiling points above 65°C. The P2 dust filter filters at least 98% of airborne particles.
Additional Details
Filter Replacement
The lifespan of dust filters and gas cartridges varies depending on the type of use, environmental conditions, the type of particulate/gas and the concentration of particulate/gas. The filters must be replaced when they are dirty, wet or when breathing becomes difficult.
The G-750 uses C-500 and F-500 cartridge filters. C-500 P2 covers airborne particles at 94% filtration; C-500 P3 covers finer particulates at 99.95%. F-500 A1P2 adds organic gas and vapour protection. F-500 ABEK1-P2 covers a broader gas spectrum — organic, inorganic, acid gases, and ammonia. Filters fit via a standard bayonet mount.
Will the G-750 fit over my prescription glasses?
It's not recommended. The arms of prescription glasses pass between the silicone seal and the face, creating an air-seal gap. Depending on frame thickness and how the mask sits, this gap can compromise the mask's airtight fit and reduce protection. For full protection, the mask is worn without glasses. If you need vision correction during longer sessions, contact lenses are the better pairing. The final decision is yours based on your task and risk assessment.
Is the lens really anti-fog?
Yes. The G-750 lens has an anti-fog scratch-resistant coating that holds up during normal use. The full-face design means your exhaled breath exits through the filter cartridges, not over the lens — which is why full-face respirators fog less than half-masks with separate goggles. Heavy exertion in cold conditions can still cause minor fogging.
Can I use the G-750 for spray painting?
Yes, with the right filter. Spray painting produces both particles and organic vapours, so use the F-500 A1P2 filter, or F-500 ABEK1-P2 for stronger solvents. The full-face design protects your eyes from overspray. Confirm the paint's safety data sheet to ensure A1 or ABEK1 covers the specific solvent in use.
Can people understand me through the mask?
Yes. The G-750 has a voice diaphragm in the centre of the mask that transmits speech clearly. You can hold a normal conversation, take instructions, or use a phone without removing the mask. Speech sounds slightly muffled compared to no mask, but it remains intelligible.
How do I get a good seal on a full-face respirator?
Place the mask over your face, pull the five-point strap harness over your head, then tighten the lower straps first and the upper straps last. Run your fingers around the silicone seal to check for hair or clothing caught in it. To test the seal, cover both filter inlets with your palms and breathe in: the mask should pull onto your face and stay there.
The lens is scratched. Can I replace it?
The G-750 itself doesn't have user-replaceable lenses. To protect the lens long-term, we sell peel-off lens covers (G-750-LC-10) — disposable film protectors that take the scratches instead of the lens. For an already-scratched lens, fit lens covers from now on to extend the life of your mask.
Is the G-750 CE certified?
Yes. The G-750 is CE certified and meets the European standards stack for reusable respirators — EN 140 (mask body), EN 14387 (gas filters), and EN 143 (particle filters). The standards cover the mask, the gas cartridges, and the particle covers used with the G-750.
